|
|
本帖最后由 热情的杨柳 于 2012-6-15 13:53 编辑
（本软件来自于一乌克兰二副）
安装教程：本软件共3个光盘镜像，安装或运行前请1.先把电脑时间调至2009年以前，如2008、2005；2.安装虚拟光驱软件；3.解压安装软件
Transas Navi-Sailor 3000 + Charts WF-40 (2008) 3CD
-------------------------------------------------------
Installing:
0. First of all install CD-DVD emulation program. And restart computer. After you can find it near clock.
1. Insert / mount CD1 ?label ("NS3000 Setup").
The menu window must appear (if not, run setup.exe from CD).
Choose "Select product by License".
the license can be ahieve from "License" on the CD1.（证书就在虚拟光盘上）
2. Next menu, choose full install (first one).
Further click NEXT until end.
The program must be installed into default folder (disk C:\Transas\NS_3000)Nothing to change!
（必须是该路径，默认是该路径，如不是请修改为该路径，因为破解文件时指向该路径的，当然你也可用dos修改一下破解文件）
4. Restart the computer.
5. Run "RUN.bat" from "!Crack" folder on CD1.（从虚拟光盘上运行"!Crack"文件夹下的"RUN.bat"，也可直接拷到硬盘上运行，因为以后运行软件前可能还需运行破解）
6. Copy shortcuts from "唢瘥觇 ?戾睨 象耜" and "唢臌觇 磬 疣犷麒?耱铍" into corresponded places of OS with replacement.(but if unreadable - do not touch them!)
7. Run "Navi-Sailor 3000" from Desktop or Start menu.
If programm run well, then continue with charts installing.
If not, uninstall the program, SENTINEL drivers and emulation, clean up register.
(searching by string "SENTINEL" and "SENTEMU"), restart computer and try again from 1.
Installing into Windows VISTA:
1a.Searching for CD1:\PRODUCTS\NS3000\Disk1\Setup.exe
RightBottonMouse click / properites / compatibility
Choose Windows XP compatibility / 问.
Run and continue from 1.
Chart installing:
8. Insert / mount CD2 ("WF40_CD1").
Do not enter any License!!! Just click NEXT. Waiting a long time...
When finish - click 问.
9. Insert / mount CD3 ("WF40_CD2").
Same Installing.
10.Run "Navi-Sailor 3000".
If now with charts - 问. If without - restart and try 8-9.
Connecting to GPS and other sensors:
1. Run "System Configuration Utility", folder "Service",
"Protected settings" - input password "transas", ENTER.
2. folder "Sensors-Accuracy" / "Attached Sensors" / "Pos.system 1"
- select COM Port, wich GPS is used.
Same with other sensors.
Apply / 问.===》关于连接GPS，我的机子为COM7个人情按自己机子设置.如果波特率不对，则选COMPORTS SETTINGS选项卡
3. Continue when the "Navi-Sailor 3000" is running:该步骤是运行海图后的操作
"Tasks list" / "Monitoring" / "Ship position" / "Primary Positioning System"
/ "Positioning Source" - select "PS 1 : GPS".
BRGDS
2/O Aleksandr
本海图用起来还不错，于英版海图高度一致，可人工修改海图，对未更新的重要障碍物可手动输进去，本人使用了一段时间，还是比较爽的。破解后只要设置电脑时间在2009年之前，可以长期使/试用。下载后，仅供学习使用，请于24小时内删除，版权归NAVISAILOR.特此鸣谢。
附件已更新。
|
本帖子中包含更多资源
您需要 登录 才可以下载或查看，没有账号？注册
×
|
|隐私政策|注册协议|注册协议|Landho 看海-懒猴航海-电子海图
( 津ICP备19004518号-1 )
发表于 2012-4-27 09:15:46
发表于 2012-4-27 10:03:38
